Ibuki Kitamura, Ikuo Nanno, Norio Ishikura, Masayuki Fujii, Shinichiro Oke, Toshiyuki Hamada, Simulation-Based Analysis of the Heating Behavior of Failed Bypass Diodes in Photovoltaic-Module Strings, Energies, Vol.19, No.2, 472, (January 2026), pp.1-14.
Toshiyuki Hamada, Kazuki Nishida, Masafumi Yoshida, Impact of Ar/CF₄ Mixed Gas Flow Rate on Silicon Etching Using Surface Discharge Plasma, Applied Sciences, Vol.14, No.10,4252, (May 2024), pp.1-9.
Toshiyuki Hamada, Ikuo Nanno, Norio Ishikura, Masayuki Fujii, Shinichiro Oke, Breakdown Characteristics of Schottky Barrier Diodes used as Bypass Diodes in Photovoltaic Modules under Lightning Surges, Energies, Vol.16, No.23,7792, (November 2023), pp.1-11.
Toshiyuki Hamada, Tomoki Azuma, Ikuo Nanno, Norio Ishikura, Masayuki Fujii, Shinichiro Oke, Impact of Bypass Diode Fault Resistance Values on Burnout in Bypass Diode Failures in Simulated Photovoltaic Modules with Various Output Parameters, Energies, Vol.16, No.16, (August 2023), pp.1-9.
濱田俊之,岡本昌幸,電気工学科における電気工事士技能実習型PBLの提案と実施時期の検討 ,日本高専学会論文誌,Vol. 28, No. 3, (2023年7月)pp. 61-67.
濱田俊之,岡本昌幸,電気工事士の実技実習をテーマとした課題解決型授業の提案と実践,電気設備学会論文誌,Vol. 43,No. 4,(2023年5月),pp.32-40
濱田俊之,東知希,南野郁夫,藤井雅之,石倉規雄,桶真一郎,太陽電池モジュール内のバイパスダイオードの故障特性が焼損に与える影響,電気設備学会論文誌,Vol. 42, No. 3, (2022年11月) pp.16-17
河﨑巧真、山本稜之、和木大祐、濱田俊之、南野郁夫、ホットスポット発生時のPVセルの温度分布を再現する電流FB型連成モデルの提案、太陽エネルギー、Vol. 47, No. 6, pp. 69-75 (2021年12月).
Toshiyuki Hamada, Shunsuke Masuda, Kazuki Nishida, Soma Yamamoto, Etching Characteristics of SixNy Film on Textured Single Crystalline Silicon Surface using Ar/CF4 and He/CF4 Surface Discharge Plasma, Coatings, No. 10, 6, (June 2020), pp. 563-571.
濱田俊之、中本健太、電磁リレーを用いた太陽光発電システム用感電防止システムの提案、太陽エネルギー、Vol. 46、No. 3、(2020年6月)pp. 103-108.
T. Hamada, K. Nakamoto, I. Nanno, N. Ishikura, S. Oke, M. Fujii, Characteristics of Failed Bypass Diodes for Photovoltaic Module by Artificial and Natural Lightning, Lecture Notes in Electrical Engineering, Springer, Series Vol. 598, ISBN978-3-030-31675-4, pp. 1218-1224, (March 2020).
中本健太、濱田俊之、南野郁夫、藤井雅之、石倉規雄、桶真一郎、太陽電池モジュールの金属フレームへの大電流インパルス試験、電気設備学会論文誌、Vol. 40、No. 2、(February, 2020)pp.10-11
T. Hamada, Etching Characteristics of Si using Surface Discharge Plasma under Ar/CF4 and He/CF4 Conditions, Materials Science in Semiconductor Processing, Elsevier, Vol.66, pp.212-214, (August 2017).
濱田俊之,峰大樹,迫田達也,多孔質膜利用の水中アルゴンプラズマによる芽胞菌殺菌機構の考察,電気学会論文誌A(基礎・材料・共通部門誌),Vol. 136, No.1,pp. 64-65, (2016年1月) (in Japanese)
有村拓也,平野啓太,濱田俊之,迫田達也,沿面放電プラズマを用いたSiエッチングの電源周波数依存性,電気学会論文誌A(基礎・材料・共通部門誌),Vol. 132,No. 4,pp. 333-334,(April 2012)
T. Hamada, T. Arimura, T. Sakoda, Studies on optimal gas supply for a maskless etching system with micro- discharge plasma operated at atmospheric pressure, Plasma Chemistry and Plasma Processing, Springer, Vol. 32, No. 2, pp.325-332, (March 2012).
T. Hamada, S. Arakawa, M. Otsubo, T. Sakoda, Fabrication of electrode groove on silicon solar cell by high‐pressure surface discharge, ELECTRONIC and COMMUNICATIONS in JAPAN, WILEY Inter Science, Vol. 94, Issue 4, pp. 28-35, (April 2011).
T. Hamada, T. Sakoda, Etching Characteristics of Fabricated Grooves on Silicon Solar Cell Using Surface Discharge Plasma, IEEJ Transactions on Fundamentals and Materials, The Institute of Electrical Engineers of Japan , Vol. 130-A, No. 11, pp.999-1003, (November 2010).
濱田俊之,水本貴之,有村拓也,迫田達也,大気圧沿面放電プラズマを用いたマスクレスエッチング,電気学会論文誌A(基礎・材料・共通部門誌),Vol. 130-A, No. 10, pp.907-912, (October 2010)
T. Hamada, M. Otsubo and T. Sakoda, Examination of Maskless Etching Technique Using a Localized Surface Discharge Plasma, The Institute of Electrical Engineers of Japan Transactions on Electrical and Electronic Engineering (IEEJ-TEEE), WILEY Inter Science, Vol. 5, No. 1, pp. 115-117, (January 2010).
T. Hamada, T. Sakoda, M. Otsubo, Studies on non-thermal atmospheric pressure plasma process conditions for groove formation on silicon nitride for silicon solar cells, Materials Science in Semiconductor Processing, Elsevier, Vol. 12, No. 3, pp.106-112, (December, 2009).
T. Hamada, M. Otsubo and T. Sakoda, Plasma Grooving System Using Surface Discharge Plasma, Plasma Chemistry and Plasma Processing, Springer, Vol. 29, Issues 3, pp. 197-204, (June, 2009).
濱田俊之, 荒川純一, 大坪昌久, 迫田達也, 高気圧沿面放電による太陽電池用電極溝の作製, 電気学会論文誌A(材料・基礎・共通部門誌), 電気学会, Vol. 128-A, No. 12, pp. 733-739, (December, 2008)
T. Hamada, S. Arakawa, T. Sakoda, M. Otsubo, K. Matsui, K. Nagasawa, Optimization of Convex Electrode Geometry for Surface Discharge Used for Fabrication of the Electrode Groove on Solar Cells, Surface and Coatings Technology, Elsevier, Vol. 202, No. 22-23, pp. 5405-5409 (30 August, 2008).
T. Sakoda, T. Hamada, K. Matsukuma, H. Herai, K. Matsui and K. Nagasawa, Selective Etching of Silicon Nitride Film on Single Crystalline Silicon Solar Cell Using Intensive Surface Discharge, Japanese Journal of Applied Physics (JJAP), The Japan Society of Applied Physics. Vol. 45, No. 5A, pp. 3992-3993, (9 May 2006).
T. Sakoda, T. Hamada and K. Matsukuma, Plasma Surface Texturing of Single-Crystal Silicon Using Dielectric Barrier Discharge, Transactions of the Materials Research Society of Japan, The Materials Research Society of Japan (MRS-J), Vol. 30, No.3, pp. 595-598, (2005).
Norio Ishikura, Kaima Yamada, Toshiyuki Hamada, Ikuo Nanno, Shinichiro Oke , Masayuki Fujii, Comparative Study of Machine Learning Algorithms for Fault Diagnosis in PV Systems Specifically under low Irradiance Conditions, 43rd European Photovolotaic Solar Energy Conference and Exhibition, No. 4DV.4.44, Rotterdam, Netherlands, September 2026.
Tensei Akinaga, Toshiyuki Hamada, Ikuo Nanno, Norio Ishikura, Masayuki Fujii, Shinichiro Oke, Identification of Burnout Failure Conditions in Rapid Shutdown Devices for Photovoltaic Systems, 43rd European Photovolotaic Solar Energy Conference and Exhibition, No. 4DV.4.31, Rotterdam, Netherlands, September 2026.
Ibuki Kitamura, Toshiyuki Hamada, Ikuo Nanno, NUMERICAL SIMULATION OF OUTPUT CHARACTERISTICS OF PHOTOVOLTAIC MODULE WITH SHORT AND OPEN CIRCUITED BYPASS DIODES, 42st European Photovolotaic Solar Energy Conference and Exhibition, ISBN3-936338-93-0, No. 3AV.3.22, Bilbao, Spain, September 2025, pp. 020190-001 - 020190-004.
Ibuki Kitamura, Toshiyuki Hamada, Ikuo Nanno, Norio Ishikura, Masayuki Fujii, Shinichiro Oke, NUMERICAL SIMULATION OF THE BYPASS DIODE FAILURE RESISTANCE AND THOSE POWER CONSUMPTION IN A PHOTOVOLTAIC SOLAR MODULE WITH FAILED BYPASS DIODE, 41st European Photovolotaic Solar Energy Conference and Exhibition, No. 3AV.2.42, Vienna, Austria, September 2024, pp.020197-001 - 020197-004.
Tomoki Azuma, Toshiyuki Hamada, Ikuo Nanno, Masayuki Fujii, Norio Ishikura and Shinichiro Oke, IMPACT OF BYPASS DIODE FAULT RESISTANCE ON BURNOUT IN PHOTOVOLTAIC MODULES WITH DIFFERENT FILL FACTORS, International Symposium on High Voltage Engineering 2023 (ISH2023),No. P1.33, August 2023, Glasgow, UK, pp.1178-1181.
Tomoki Azuma, Toshiyuki Hamada, Ikuo Nanno, Masayuki Fujii, Norio Ishikura and Shinichiro Oke, STUDY ON THE RELATIONSHIP BETWEEN POWER CONSUMPTION AND ELECTRICAL CHARACTERISTICS OF A FAILED BPD DURING LOAD OPERATION OF A PHOTOVOLTAIC MODULE WITH BYPASS DIODE FAILURE, Grand Renewable Energy 2022 International Conference(GRE2022), No. 100035, December 2022, Online conference.
Y. Okamura, R. Michida, T. Hirata, M. Fujii, I. Nanno,T. Hamada, S. Oke, N. Ishikura, A Study on Continuous Monitoring and Fault Detection of Photovoltaic Modules, 31st International Photovoltaic Science and Engineering Conference (PVSEC-31), December 2021, p. 190.
K Yamamoto, I Nanno, J Murakami, T Hamada, M Fujii, T Hirata, S Oke, and N Ishikura, Proposal of Reproduded I-V Characeristics of aPhotovoltaic System Linearizaiton Method to Suppress Vibration of FB Model, The 11th International Symposium on Solar Energy and Efficient Energy Usage (SOLARIS2021), No. A-73, (September 2021), pp. 1-5.
Toshiyuki Hamada, Shinnosuke Yoneda, Kenta Nakamoto, Masayuki Okamoto, Development of Electric Shock Prevention Systems for Photovoltaic Solar Systems using Electromagnetic Relay, IEEE 48th Photovoltaic Specialists Conference (PVSC-48), Proc. of PVSC-48, Virtual meeting, ISSN: 0160-8371, June 20 - 25, (2021), Date Added to IEEE Xplore: 26 August 2021.
Shuto Koyama, Ikuo Nanno, Kunpei Yamamoto, Toshiyuki Hamada, Shinichiro Oke, Norio Ishikura, Masayuki Fujii, Proposal of Open Failure BPD Diagnosis in PVS and Shade Data Generation Method, IEEE 47th Photovoltaic Specialists Conference (PVSC-47, Virtual meeting), Proc. of PVSC-47, No. #485, ISSN: 0160-8371, June 15 – August 21, (2020), Date Added to IEEE Xplore: 05 January 2021.
Tsukasa Uramatsu, Ikuo Nanno, Toshiyuki Hamada, Shinichiro Oke, Norio Ishikura, Masayuki Fuji, Prediction of Average Si Temperature inside BPD under lightning Surge by Electric and Temperature Coupled Model, IEEE 47th Photovoltaic Specialists Conference (PVSC-47, Virtual meeting), Proc. of PVSC-47, No. #143, ISSN: 0160-8371, June 15 – August 21, (2020), Date Added to IEEE Xplore: 05 January 2021.
Toshiyuki Hamada, Shinnosuke Yoneda, Ikuo Nanno, Norio Ishikura, Shinichiro Oke, Masayuki Fujii, Effect on Bypass Diodes of Passing an Impulse Current through the Metal Frame of a Photovoltaic Module, IEEE 47th Photovoltaic Specialists Conference (PVSC-47, Virtual meeting), Proc. of PVSC-47, No. #686, ISSN: 0160-8371, June 15 – August 21, (2020), Date Added to IEEE Xplore: 05 January 2021.
Toshiyuki Hamada, Takumi Kashiwaya, Shinnosuke Yoneda, Kenta Nakamoto, Durability Performance Testing of SiC Diodes for use as Bypass Diodes in Photovoltaic Modules, IEEE 47th Photovoltaic Specialists Conference (PVSC-47), Proc. of PVSC-47, Virtual meeting, No. #594, ISSN: 0160-8371, June 15 – August 21, (2020), Date Added to IEEE Xplore: 05 January 2021.
Toshiyuki Hamada, Kenta Nakamoto, Ikuo Nanno, Norio Ishikura, Shinichiro Oke, Masayuki Fujii, Fault Characteristics of Schottky Barrier Diode used as Bypass Diode in Photovoltaic Module against Repetitive Surges, IEEE 47th Photovoltaic Specialists Conference (PVSC-47, Virtual meeting), Proc. of PVSC-47, No. #291, ISSN: 0160-8371, June 15 – August 21, (2020), Date Added to IEEE Xplore: 05 January 2021.
Y. Shimizu, T. Hamada, Influence of Carrier Gas for Etching of Silicon Nitride Film on Silicon Solar Cells using Surface Discharge Plasma, The 7th East Asia Joint Symposium on Plasma and Electrostatics Technologies for. Environmental Applications (EAPETEA-7), Proc. of EAPETEA-7, No. P2-11, Naha, Okinawa, November 27, 2019, Proc. USB.
T. Kashiwaya, K. Nakamoto, I. Nanno, T. Hamada, N. Ishikura, S. Oke, M. Fujii, Characteristics of Failure SiC Schottky Barrier Diode and Si Schottky Barrier Diode using Induced Lightning Serge Test, The 7th East Asia Joint Symposium on Plasma and Electrostatics Technologies for. Environmental Applications (EAPETEA-7), Proc. of EAPETEA-7, No. P1-02, Naha, Okinawa, November 26, 2019, Proc. USB.
Y. Fujimoto, K. Nakamoto, I. Nanno, T. Hamada, N. Ishikura, S. Oke, M. Fujii, T. Oozeki, Influence of an Impulse Current near a Photovoltaic Solar Module on Bypass Diode Characteristics, 8th IEEE International Conference on Renewable Energy Research and Applications (ICRERA2019), Proc. of ICRERA2019, No. CFP1935T-ART, ISBN978-1-7281-3587-8, ISSN2572-6013, Brasov, Romania, (November 5, 2019), 181-185.
T. Hamada, K. Nakamoto, T. Kasiwaya, I. Nanno, N. Ishikura, M. Fujii, S. Oke, Characteristics of Failure SiC Schottky Barrier Diode and Si Schottky Barrier Diode using Induced Lightning Serge Application Test, 8th IEEE International Conference on Renewable Energy Research and Applications (ICRERA2019), Proc. of ICRERA2019, No. CFP1935T-ART, ISBN978-1-7281-3587-8, ISSN2572-6013, Brasov, Romania, (November 6, 2019), 631-635.
T. Hamada, K. Nakamoto, I. Nanno, N. Ishikura, S. Oke, M. Fujii, Characteristics of Failed Bypass Diodes for Photovoltaic Module by Artificial and Natural Lightning, International Symposium on High Voltage Engineering 2019 (ISH2019), Proc. of ISH2019, Budapest, (August 2019), Proc. USB (7 pages).
T. Hamada, K. Nakamoto, I. Nanno, N. Ishikura, M. Fujii, S. Oke, Failure Characteristics of Schottky Barrier Diodes for Photovoltaic Modules Short-Circuited by Lightning-Induced Surges, The International Conference on Electrical Engineering 2019 (ICEE2019), Proc. of ICEE2019, No. ICEE19-J114, Hong Kong, (3 July 2019).
N. Ishikura, T. Okamoto, I. Nanno, T. Hamada, S. Oke, M. Fujii, Simulation Analysis of Really Occurred Accident Caused by Short Circuit Failure of Blocking Diode and Bypass Circuit in the Photovoltaics System, 7th IEEE International Conference on Renewable Energy Research and Applications (ICRERA2018), Proc. of ICRERA2018, No. CFP1835T-ART, ISBN978-1-5386-5982-3, ISSN2572-6013, Paris, France, October 15, 2018, pp. 533-536.
T. Hamada, K. Nakamoto, I. Nanno, M. Fujii, S. Oke, N. Ishikura, Characteristics of Failure Schottky Barrier Diode and PN Junction Diode for Bypass Diode using Induced Lightning Serge Test, 7th IEEE International Conference on Renewable Energy Research and Applications (ICRERA2018), Proc. of ICRERA2018, No. CFP1835T-ART, ISBN978-1-5386-5982-3, ISSN2572-6013, Paris, France, October 15, 2018, pp. 482-486.
S. Oke, H. Sakai, H. Tottori, I. Nanno, T. Hamada, N. Ishikura, M. Fujii, I-V Characteristics of Broken Bypass Diode on PV Module, 35th European Photovoltaic Solar Energy Conference (35th EU PVSEC), Proc. of 35th EU-PVSEC, Brussel, Belgium, September 27, 2018, pp. 1996-2000.
T. Hamada, K. Nakamoto, I. Nanno, N. Ishikura, S. Oke, M. Fujii, Breakdown Characteristics of Schottky Barrier Diode for PV Module using Induced Lightning Surge, The International Conference on Electrical Engineering 2018 (ICEE2018), Proc. of ICEE2018, G4-2013, Seoul, Korea (June 2018), pp.1787-1790
T. Hamada, K. Nishida,Effect of gas flow rate for silicon etching using surface discharge plasma, The International Conference on Electrical Engineering 2018 (ICEE2018), Proc. of ICEE2018, No. G4-2010, Seoul, Korea (June 2018), pp. 1783-1786
S. Oke, H. Sakai, H. Tottori, I. Nanno, T. Hamada, M. Fujii, N. Ishikura, CHARACTERISTICS AND RISKS OF BROKEN BYPASS DIODE WITHINDUCED LIGHTNING, Grand Renewable Energy 2018 International Conference and Exhibition (GRE2018), No. a91154, Pacifico Yokohama, Yokohama, Japan, (21 June 2018)
S. Yamamoto, T. Hamada, Influence of Carrier Gas for Etching of Silicon Nitride Film on Silicon Solar Cells using Surface Discharge Plasma, 10th International Symposium on Advanced Plasma Science and its Applications for Nitrides and Nanomaterials / 11th International Conference on Plasma-Nano Technology & Science (ISPlasma 2018 / IC-PLANTS 2018 Technology), No. 06P07, Meijo University, Nagoya, Japan, (March 2018)
T. Hamada, Etching of Si using surface discharge at various carrier gases, The International Conference on Electrical Engineering 2016 (ICEE2016), Proc. of ICEE2016, Okinawa, Japan (July 2016).
Takuya Arimura, Takayuki Mizumoto, Toshiyuki Hamada, Tatsuya Sakoda, Development of a Grooving System for Solar Cell”, 16th International Conference on Electrical Engineering (ICEE2010), Proc. ICEE2010, Busan, Korea (July 2010), Proc. CD-ROM.
T. Hamada, T. Sakoda, M. Otsubo, Studies on Etching Characteristics of Fabricated Grooves on Silicon Solar **Cell Using Surface Discharge Plasma, Korea-Japan Joint Symposium on Electrical Discharge and High Voltage Engineering, Korea, No. PD-15, Busan, Korea, (November 2009), pp. 234-237.
- T. Mizumoto, **T. Hamada, T. Sakoda, M. Otsubo, Silicon etching using atmospheric pressure surface discharge plasmas operated with different power sources, The 7th Asia-European International Conference on Plasma Surface Engineering, PSE2009, No. PA3061, Busan, Korea (September 2009) pp. 421
T. Hamada, T. Sakoda, M. Otsubo, Maskless Plasma Etching Technique Using Surface Discharge Plasma, The 7th Asia-European International Conference on Plasma Surface Engineering, PSE2009, No. PA1040, Busan, Korea (September 2009) pp. 214
T. Hamada, T. Sakoda, M. Otsubo, Studies on Si etching using atmospheric pressure surface discharge plasma, The 10th International Symposium on Sputtering and Plasma Processes, ISSP2009, Proc. of ISSP2009, No. PP P-2, Kanazawa Japan, (July 2009) pp. 496-499.
T. Hamada, T. Sakoda, M. Otsubo, Studies on etchings of silicon nitride films with various film thickness silicon substrates using surface discharge, The 4th International Congress on Cold Atmospheric Pressure Plasmas: Sources and Applications, CAPPSA2009, Proc. of CAPPSA2009, Gent Belgium, (June 2009) pp. 37-40.
T. Hamada, T. Sakoda, M. Otsubo, Studies on formation of electrode grooves for solar cell using high pressure surface discharge, The 4th International Congress on Cold Atmospheric Pressure Plasmas: Sources and Applications, CAPPSA2009, Proc. of CAPPSA2009, Gent Belgium, (June 2009) pp. 33-36.
T. Hamada, M. Otsubo, T. Sakoda, Etching of Silicon Nitride Using Atmospheric Pressure Surface Discharge Plasma, The 7th International Conference on Materials Processing for Properties and Performance, MP3, No.AMFT-7005, Singapore (November. 2008) Proc. CD-ROM.
R. Hirayama, T. Hamada, M. Otsubo and T. Sakoda, Si Etching by Atmospheric Pressure Surface Discharge, 4th Vacuum and Surface Sciences Conference of Asia and Australia, VASSCAA-4, No. 28P016, Matsue, Japan (October. 2008) pp.180.
T. Hamada, T. Rokuta, R. Kondo, M. Otsubo and T. Sakoda, Plasma Grooving System Using Surface Discharge Plasma, 4th Vacuum and Surface Sciences Conference of Asia and Australia, VASSCAA-4, No. 28P024, Matsue, Japan (October. 2008) pp.188.
T. Hamada, S. Arakawa, T. Sakoda, M. Otsubo, Fabrication of Electrode Grooves on Solar Cells Using Surface Discharge, 17th International Photovoltaic Science and Engineering Conference,PVSEC17, Technical Dijest of the International PVSEC-17, No. 4P-P2-17, Fukuoka, Japan, (December. 2007) pp. 708-709.
S. Arakawa, T. Hamada, T. Sakoda, M. Otsubo, Effects of Back Electrode for Etching of Silicon Nitride Film on Solar Cells Using Surface Discharge, Proc. of J-K Joint Symp. ED and HVE 2007, 2007 Japan-Korea Joint Symposium on Electrical Discharge and High Voltage Engineering, No. 16B-p5, Tokyo, Japan, (November. 2007) pp.91-94.
T. Hamada, S. Arakawa, T. Sakoda, M. Otsubo, K. Matsui, K. Nagasawa, Optimization of Convex Electrode Geometry for Surface Discharge Used for Fabrication of the Electrode Groove on Solar Cells, Asian-European International Conference on Plasma Surface Engineering, AEPSE2007, No. P, pp. (September 2007).
M. Esaki, M. Taniguchi, T. Hamada, D. Tashima, T. Sakoda, and M. Otsubo, Effect of Surface Modification of Carbon Electrode for Electric Double Layer Capacitor Using Dielectric Barrier Discharge, 6th Asian-European International Conference on Plasma Surface Engineering, AEPSE2007, No. P2037, Nagasaki Japan, (September 2007) pp. 205.
T. Hamada, T. Sakoda, M. Otsubo, M. Matsui and K. Nagasawa: Evaluation of Electrode Grooves Formed Using Surface Discharge Plasma, Proc. of ISPC18, 18th International Symposium on Plasma Chemistry, ISPC18, No. 28-P74, Kyoto, Japan (August. 2007) Proc. CD-ROM.
T. Hamada, T. Sakoda, K. Matsukuma, H. Herai, K. Matsui, K. Nagasawa Studies of Conditions Required for Formation of Electrode Grooves on Silicon Solar Cell Using Surface Discharge, ACED13, Proc. of ACED13 , 13th Asian Conference on Electrical Discharge, No. O-14, Hokkaido, Japan, (October. 2006) Proc. CD-ROM.